Prototyping Avionics

An F-15E Strike Eagle in flight.

The F-15E Strike Eagle: An array of avionics and electronics systems gives it the capability to fight at low altitude, day or night, and in all weather. (Image courtesy of Armchair Aviator on Flickr.)

Instructor(s)

MIT Course Number

16.682

As Taught In

Spring 2006

Level

Undergraduate

Cite This Course

Course Features

Course Description

In the past building prototypes of electronic components for new projects/products was limited to using protoboards and wirewrap. Manufacturing a printed-circuit-board was limited to final production, where mistakes in the implementation meant physically cutting traces on the board and adding wire jumpers - the final products would have these fixes on them! Today that is no longer the case, while you will still cut traces and use jumpers when debugging a board, manufacturing a new final version without the errors is a simple and relatively inexpensive task. For that matter, manufacturing a prototype printed circuit board which you know is likely to have errors but which will get the design substantially closer to the final product than a protoboard setup is not only possible, but desirable. In this class, you'll learn to design, build, and debug printed-circuit-boards.

Saenz-Otero, Alvar. 16.682 Prototyping Avionics, Spring 2006. (MIT OpenCourseWare: Massachusetts Institute of Technology), http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-682-prototyping-avionics-spring-2006 (Accessed). License: Creative Commons BY-NC-SA


For more information about using these materials and the Creative Commons license, see our Terms of Use.


Close