GUEST SPEAKER 1: A lights game, where
basically if you tap on the red light, you increase your score.
And each time you tap correctly, it keeps switching in between.
And so, the original concept for this game
was a kind of a game sort of like Guitar Hero or Dance Dance
Revolution, where you have the music synced with the light.
So you're tapping them in rhythm.
And if you get then in rhythm and at the right time,
the right buttons, that's when you get the highest score.
But we were having a lot of issues with regards
to just getting this hardware and software set up,
so we decided to throw it on the stove for the project.
It's not my plain theory.
We could apply this very easily to that type of project.
So basically what the components we have here are,
we have capacitive sensors.
So basically just a wire where you just touch it,
it just changes the capacitance of the circuit
so you can just register that.
They're pretty receptive, pretty receptive.
Lost the [INAUDIBLE] somewhere.
GUEST SPEAKER 2: And they're in rainbow order.
You hit them in rainbow order, so you have the ability
to project ahead.
You know it's going to go here, here, here, here, here.
No problem.
GUEST SPEAKER 1: See, you follow the orange one,
you see that one is what becomes red next.
GUEST SPEAKER 3: Oh, you told them the--
[LAUGHTER]
--secret.
GUEST SPEAKER 4: And one of the cool things that we realized
is that, upon making this, that actually having LED set up
farther away from the acrylic covering
actually makes the squares seem brighter
because the light kind of diffuses.
As opposed to being right next to the acrylic
where you just see the LEDs.
But if you back off, you actually
get a lot more illumination.
One of the cool lessons.
GUEST SPEAKER 1: We would love to give a lot of credit to Tay.
He was the guy in our group who made this acrylic with a laser
printer, and put the wood so that each of the squares
were in their own places.
He just made this beautiful set up.
Unfortunately, he's not here today.
GUEST SPEAKER 4: Also a lot of the soldering back here.
There's a lot of soldering that's going on.
These are really cool.
Also, they sell LEDs.
These LEDs were actually one series of LEDs down the strip.
So there's like 150 LEDs on a couple
of meters of this kind of a--
GUEST SPEAKER 5: A spool.
GUEST SPEAKER 4: On a spool.
And you can actually control each one individually
with Arduino.
Just be careful not to power up all of the,
because you'll actually pass a lot of current
through your USB.
Probably damage your USB Arduino.
One of the things that we learned about wiring
and knowing how much current's going through.
GUEST SPEAKER 1: Luckily, we learned--
AUDIENCE: Are you going to continue to USB, or?
GUEST SPEAKER 1: No, we learned this one.
GUEST SPEAKER 5: Luckily Andrew had the magic line of code
which allows you to just limit the total amount of current
you're putting out.
So even if you ask it to draw a ton of current,
you just dim LEDs.
GUEST SPEAKER 4: We were actually warned about a minute
before we were going to try it, so it saved a laptop
from being destroyed.
So it was a big lesson.
GUEST SPEAKER 3: Anybody want to have a try?
GUEST SPEAKER 1: Well, firstly, do you want to say anything?
GUEST SPEAKER 3: That was about the right summary.
And we will maybe attempt to continue
to add more features, including timing
so you get more points for ending it
in the rhythm with lights or music.
We were originally going to include some of the processing
code that the Arduino team used last time
to make some lights that flash and sync
with the beat of the music.
But due to technical difficulties
with wiring, and capacity, et cetera.
That's going to be in a later version.
GUEST SPEAKER 1: Yeah, so, that's our project.
[APPLAUSE]
Yeah?
AUDIENCE: You mentioned an acrylic piece was printed.