WEBVTT

00:00:02.604 --> 00:00:31.480
[MUSIC PLAYING]

00:00:31.480 --> 00:00:34.420
PROFESSOR: Thin Layer
Chromatography, or TLC,

00:00:34.420 --> 00:00:38.620
is a common analytical technique
used in organic laboratories.

00:00:38.620 --> 00:00:40.780
TLC can be helpful
when you are trying

00:00:40.780 --> 00:00:43.480
to identify the
components of a mixture

00:00:43.480 --> 00:00:46.120
or assess the
purity of a sample.

00:00:46.120 --> 00:00:50.770
It is also used to monitor both
reactions and purifications.

00:00:50.770 --> 00:00:53.890
It can take some time
to become a pro at TLC,

00:00:53.890 --> 00:00:56.230
but this video should
help to familiarize you

00:00:56.230 --> 00:00:57.490
with the basic technique.

00:01:00.830 --> 00:01:03.500
TLC plates are composed
of a thin layer

00:01:03.500 --> 00:01:06.920
of a polar adsorbent,
either silica or alumina,

00:01:06.920 --> 00:01:10.370
which has been bound to a plate
of solid support, generally

00:01:10.370 --> 00:01:12.140
plastic or glass.

00:01:12.140 --> 00:01:14.540
In most cases, a
fluorescent powder

00:01:14.540 --> 00:01:16.580
is also mixed in
with the adsorbent

00:01:16.580 --> 00:01:18.620
to aid with
visualization, as you

00:01:18.620 --> 00:01:20.060
will see later in this video.

00:01:23.100 --> 00:01:25.650
A sample is applied
to a TLC plate

00:01:25.650 --> 00:01:28.050
using a thin glass spotter.

00:01:28.050 --> 00:01:31.740
Micropipets, such as the
one shown here, can be used

00:01:31.740 --> 00:01:34.510
and are conveniently
commercially available.

00:01:34.510 --> 00:01:37.620
However, in many
laboratories, TLC spotters

00:01:37.620 --> 00:01:41.040
are prepared by heating
and pulling capillary tubes

00:01:41.040 --> 00:01:43.560
or disposable Pasteur pipets.

00:01:43.560 --> 00:01:46.110
One benefit of making
your own spotters

00:01:46.110 --> 00:01:47.970
is that these
homemade spotters are

00:01:47.970 --> 00:01:49.890
usually thinner
than commercially

00:01:49.890 --> 00:01:51.780
available micropipets.

00:01:51.780 --> 00:01:54.480
You can watch the advanced
thin layer chromatography

00:01:54.480 --> 00:01:57.030
video for a demonstration
of this procedure.

00:02:00.190 --> 00:02:03.430
Once a TLC plate has been
spotted with a sample,

00:02:03.430 --> 00:02:06.610
it is developed in a developing
chamber that can easily

00:02:06.610 --> 00:02:09.280
be assembled from a
glass jar with a lid,

00:02:09.280 --> 00:02:12.730
a piece of filter paper,
and 5 to 10 milliliters

00:02:12.730 --> 00:02:14.410
of an appropriate
developing solvent.

00:02:17.040 --> 00:02:19.500
Before you get started,
make sure you also

00:02:19.500 --> 00:02:22.470
have a pair of tweezers,
a pencil, and a ruler

00:02:22.470 --> 00:02:23.330
close at hand.

00:02:34.560 --> 00:02:36.180
Assembly in the
developing chamber

00:02:36.180 --> 00:02:38.290
is very straightforward.

00:02:38.290 --> 00:02:40.950
First, slide the filter
paper into the jar

00:02:40.950 --> 00:02:44.190
so that it is flat
against the wall.

00:02:44.190 --> 00:02:47.370
Next, pour in approximately
8 millimeter layer

00:02:47.370 --> 00:02:51.345
of the appropriate developing
solvent into the jar.

00:02:51.345 --> 00:02:54.700
Tilt the jar to moisten
the filter paper,

00:02:54.700 --> 00:02:58.150
and close the lid to
prevent evaporation.

00:02:58.150 --> 00:03:00.250
You should end up with
a layer of solvent

00:03:00.250 --> 00:03:03.850
no more than 5 to
8 millimeters deep.

00:03:03.850 --> 00:03:06.790
The moist filter paper ensures
that the air in the chamber

00:03:06.790 --> 00:03:08.950
is saturated with solvent vapor.

00:03:08.950 --> 00:03:12.010
It prevents evaporation of
solvent from the TLC plate

00:03:12.010 --> 00:03:14.870
during development.

00:03:14.870 --> 00:03:17.260
Once you have put together
your developing chamber,

00:03:17.260 --> 00:03:19.420
it is time to prepare
the TLC plate.

00:03:22.690 --> 00:03:27.070
In this video, plastic-backed
alumina plates will be used.

00:03:27.070 --> 00:03:29.950
For more information on
preparing glass plates,

00:03:29.950 --> 00:03:32.290
you can watch the
advanced TLC video.

00:03:35.180 --> 00:03:39.850
Before you start, there are
a few things to remember.

00:03:39.850 --> 00:03:43.780
Always use a pencil and never
a pen to mark your TLC plates.

00:03:43.780 --> 00:03:45.790
Ink is soluble in
organic solvents

00:03:45.790 --> 00:03:49.250
and will be developed
along with your sample.

00:03:49.250 --> 00:03:51.350
Make sure that you
always mark and spot

00:03:51.350 --> 00:03:54.740
your sample on the dull and
not the shiny side of the TLC

00:03:54.740 --> 00:03:55.460
plate.

00:03:55.460 --> 00:04:00.290
Remember, the dull side is
coated with the adsorbent.

00:04:00.290 --> 00:04:02.060
Even though you should
be wearing gloves

00:04:02.060 --> 00:04:04.430
while handling TLC
plates, it is important

00:04:04.430 --> 00:04:07.580
that you do not touch the face
of the plate with your fingers.

00:04:07.580 --> 00:04:10.010
Oils from your skin
or other contaminants

00:04:10.010 --> 00:04:12.130
can adsorb to the plate
and affect your results.

00:04:15.160 --> 00:04:18.040
Before you can apply your
sample to a TLC plate,

00:04:18.040 --> 00:04:19.570
it is important
to mark the plate

00:04:19.570 --> 00:04:22.135
so that you can keep track of
where the sample is applied.

00:04:24.690 --> 00:04:28.350
One way to do this is to draw
a straight line approximately 1

00:04:28.350 --> 00:04:31.390
centimeter from the
bottom of the plate.

00:04:31.390 --> 00:04:34.090
Draw small ticks through
the line at each point

00:04:34.090 --> 00:04:35.785
where you will apply
a spot of sample.

00:04:41.820 --> 00:04:43.710
It is important that
the spots are not

00:04:43.710 --> 00:04:45.720
too close to the
edge of the plate,

00:04:45.720 --> 00:04:47.940
or evaporation from
the sides of the plate

00:04:47.940 --> 00:04:50.640
will result in
inconsistent results.

00:04:50.640 --> 00:04:53.100
It is also important that
the spots are not too close

00:04:53.100 --> 00:04:56.190
together, or you will end
up with overlapping spots

00:04:56.190 --> 00:04:59.600
after you develop the plate.

00:04:59.600 --> 00:05:01.430
Applying your
sample to the plate

00:05:01.430 --> 00:05:04.040
is probably the
trickiest part of TLC,

00:05:04.040 --> 00:05:06.680
and it may take some practice
before you can consistently

00:05:06.680 --> 00:05:11.790
apply the right amount of
sample in a small enough spot.

00:05:11.790 --> 00:05:14.460
Your TLC sample should
be fairly dilute,

00:05:14.460 --> 00:05:18.780
containing approximately 1%
to 2% of the desired compound.

00:05:18.780 --> 00:05:20.970
If the sample is too
dilute, you will not

00:05:20.970 --> 00:05:23.040
be able to visualize the spots.

00:05:23.040 --> 00:05:24.990
If the sample is
too concentrated,

00:05:24.990 --> 00:05:27.990
you will observe large streaky
spots on your final plate.

00:05:31.280 --> 00:05:35.390
To spot the plate, dip the
glass spotter into the sample

00:05:35.390 --> 00:05:37.940
and touch it lightly and
quickly to the plate.

00:05:41.840 --> 00:05:45.260
Wait briefly for the solvent to
dissolve before spotting again.

00:05:49.580 --> 00:05:52.170
Generally, 1 to 3
spots will suffice.

00:05:55.640 --> 00:05:57.770
It is crucial that you
do not leave the spotter

00:05:57.770 --> 00:06:00.170
on the plate for too
long, or you will end up

00:06:00.170 --> 00:06:02.360
with large diffuse spots.

00:06:02.360 --> 00:06:05.390
It's difficult to separate
mixtures on a TLC plate

00:06:05.390 --> 00:06:07.310
when the spots are too big.

00:06:07.310 --> 00:06:10.940
Try to keep the spots 1 to
2 millimeters in diameter.

00:06:10.940 --> 00:06:14.620
The smaller, the better.

00:06:14.620 --> 00:06:16.170
Once you have
applied your sample

00:06:16.170 --> 00:06:19.320
and the spots have dried, it's
time to develop the plate.

00:06:24.830 --> 00:06:27.687
Using your tweezers, pick
up the plate and place

00:06:27.687 --> 00:06:28.895
it in the developing chamber.

00:06:33.370 --> 00:06:35.230
Make sure that the
solvent level is

00:06:35.230 --> 00:06:38.140
below the spots on
the plate, otherwise

00:06:38.140 --> 00:06:40.930
you will end up with your sample
dissolved in the developing

00:06:40.930 --> 00:06:42.400
solvent.

00:06:42.400 --> 00:06:45.280
Replace the cap to prevent
evaporation of solvent off

00:06:45.280 --> 00:06:48.340
of the plate, and try not to
let the edges of the plate

00:06:48.340 --> 00:06:50.270
touch the filter paper.

00:06:50.270 --> 00:06:53.200
This will disturb the
capillary motion of the solvent

00:06:53.200 --> 00:06:54.860
on the plate.

00:06:54.860 --> 00:06:57.650
Keep a close eye on
the solvent front.

00:06:57.650 --> 00:07:01.070
Do not let the solvent get
closer than 5 to 10 millimeters

00:07:01.070 --> 00:07:02.840
from the top of the plate.

00:07:02.840 --> 00:07:05.450
When the solvent front
gets too close to the top,

00:07:05.450 --> 00:07:09.020
evaporation from the top of
the plate becomes a problem.

00:07:09.020 --> 00:07:11.210
The spots keep
moving up the plate,

00:07:11.210 --> 00:07:13.790
but the solvent front
appears to stop.

00:07:13.790 --> 00:07:18.452
This leads to
incorrect Rf values.

00:07:18.452 --> 00:07:33.400
[MUSIC PLAYING]

00:07:33.400 --> 00:07:36.610
When the solvent front has
reached an appropriate height,

00:07:36.610 --> 00:07:39.010
remove the plate
and immediately draw

00:07:39.010 --> 00:07:42.390
a line at the solvent front.

00:07:42.390 --> 00:07:45.915
This line will be necessary for
the calculation of Rf values.

00:07:49.840 --> 00:07:52.480
When the compound of
interest is brightly colored,

00:07:52.480 --> 00:07:56.380
no extra steps need to be
taken to visualize the spots.

00:07:56.380 --> 00:07:59.920
However, most organic compounds
are colorless and cannot be

00:07:59.920 --> 00:08:04.180
seen on a TLC plate
with the naked eye.

00:08:04.180 --> 00:08:07.780
Fortunately, most TLC
plates contain an additive

00:08:07.780 --> 00:08:09.460
that causes the
plates to fluoresce

00:08:09.460 --> 00:08:12.210
under ultraviolet light.

00:08:12.210 --> 00:08:15.720
Certain UV active compounds
are capable of quenching

00:08:15.720 --> 00:08:17.070
this fluorescence.

00:08:17.070 --> 00:08:23.510
As a result, they appear as dark
spots on the glowing TLC plate.

00:08:23.510 --> 00:08:26.300
UV lamps such as
this one are commonly

00:08:26.300 --> 00:08:28.575
found in laboratories
for just this purpose.

00:08:31.180 --> 00:08:33.490
Just place your
plate under the lamp,

00:08:33.490 --> 00:08:36.160
turn it on, and mark
the spot with a pencil.

00:08:41.120 --> 00:08:44.570
A number of TLC stains have
also been developed to aid

00:08:44.570 --> 00:08:48.110
in the visualization of spots
that cannot be seen under a UV

00:08:48.110 --> 00:08:49.150
light.

00:08:49.150 --> 00:08:51.770
You can watch the advanced
thin layer chromatography

00:08:51.770 --> 00:08:54.590
video for a demonstration
of a few of these staining

00:08:54.590 --> 00:08:57.270
procedures.

00:08:57.270 --> 00:09:01.290
TLC data is described
in terms of Rf values.

00:09:01.290 --> 00:09:03.480
Under a specific
set of conditions,

00:09:03.480 --> 00:09:07.530
a particular compound should
always exhibit the same Rf.

00:09:07.530 --> 00:09:09.330
Let's quickly run
through the procedure

00:09:09.330 --> 00:09:12.500
for calculating an Rf value.

00:09:12.500 --> 00:09:14.570
First, measure the
distance from where

00:09:14.570 --> 00:09:18.080
the spot started on the
plate to where it ended up.

00:09:18.080 --> 00:09:21.560
Always measure from the
center of the final spot.

00:09:21.560 --> 00:09:26.240
We'll call this distance A.
Next, measure the distance

00:09:26.240 --> 00:09:29.690
from where the spot started to
where the solvent front ended

00:09:29.690 --> 00:09:30.440
up.

00:09:30.440 --> 00:09:32.540
We'll call this distance B.

00:09:32.540 --> 00:09:35.400
Do not measure from the
bottom of the plate.

00:09:35.400 --> 00:09:36.860
This is a common
mistake that will

00:09:36.860 --> 00:09:40.290
lead to incorrect Rf values.

00:09:40.290 --> 00:09:43.020
The Rf value is
defined as the ratio

00:09:43.020 --> 00:09:45.150
between the distance
the spot moved,

00:09:45.150 --> 00:09:47.820
A, and the distance
the solvent moved,

00:09:47.820 --> 00:09:52.350
B. This value is dependent on
the polarity of the compound

00:09:52.350 --> 00:09:55.650
and the polarity of
the developing solvent.

00:09:55.650 --> 00:09:58.770
Polar compounds will
have lower Rf values

00:09:58.770 --> 00:10:05.010
than nonpolar compounds under
the same developing conditions.

00:10:05.010 --> 00:10:07.560
This series of plates
illustrates the effect

00:10:07.560 --> 00:10:10.500
of solvent polarity on Rf.

00:10:10.500 --> 00:10:12.780
As the polarity of
the developing solvent

00:10:12.780 --> 00:10:15.510
is increased from left
to right, the spot

00:10:15.510 --> 00:10:17.880
moves further up the plate.

00:10:17.880 --> 00:10:21.600
The value of A gets larger
while the solvent front, B,

00:10:21.600 --> 00:10:23.250
stays the same.

00:10:23.250 --> 00:10:26.160
Increasing the polarity
of the developing solvent

00:10:26.160 --> 00:10:29.520
generally increases the Rf
values of all of the spots.

00:10:32.250 --> 00:10:34.290
It is a good idea
to use a developing

00:10:34.290 --> 00:10:39.900
solvent that gives you Rf
values between 0.2 and 0.8.

00:10:39.900 --> 00:10:43.050
This will generally give you
the most effective separation

00:10:43.050 --> 00:10:46.900
when you have more than one
compound in your sample.

00:10:46.900 --> 00:10:49.710
For example, a mixture
of two compounds

00:10:49.710 --> 00:10:53.850
was spotted and developed in
hexanes, a nonpolar solvent.

00:10:53.850 --> 00:10:58.650
The final plate shows only
one spot with a very low Rf.

00:10:58.650 --> 00:11:01.650
The same mixture was
developed in ethyl acetate,

00:11:01.650 --> 00:11:05.010
a polar solvent, and once
again, the final plate

00:11:05.010 --> 00:11:10.290
shows only one spot, this
time with a very high Rf.

00:11:10.290 --> 00:11:12.780
When a mixture of
hexane and ethyl acetate

00:11:12.780 --> 00:11:14.910
was used as a
developing solvent,

00:11:14.910 --> 00:11:17.280
the two spots were resolved.

00:11:17.280 --> 00:11:22.050
Notice that both spots are
near the center of the plate.

00:11:22.050 --> 00:11:24.270
TLC is frequently
used to compare

00:11:24.270 --> 00:11:26.640
the identity of two compounds.

00:11:26.640 --> 00:11:30.210
In a perfect world, TLC data
would be consistent from plate

00:11:30.210 --> 00:11:32.340
to plate and chamber to chamber.

00:11:32.340 --> 00:11:36.210
Unfortunately, small deviations
in development conditions

00:11:36.210 --> 00:11:39.000
affect the observed Rf values.

00:11:39.000 --> 00:11:41.850
As a result, it is most
convincing to compare

00:11:41.850 --> 00:11:47.860
Rf values of different
samples on the same TLC plate.

00:11:47.860 --> 00:11:51.550
For example, you know that
the unknown sample marked

00:11:51.550 --> 00:11:56.200
with a question mark consists of
either compound A, compound B,

00:11:56.200 --> 00:11:58.300
or a mixture of the two.

00:11:58.300 --> 00:12:03.620
You can use TLC to determine
the identity of the unknown.

00:12:03.620 --> 00:12:06.290
You will need two TLC plates.

00:12:06.290 --> 00:12:10.880
Make three marks on the first
TLC plate, one for the unknown,

00:12:10.880 --> 00:12:15.020
one for A, and one in the
center for the co-spot.

00:12:15.020 --> 00:12:16.760
Do the same with
the second plate,

00:12:16.760 --> 00:12:24.930
except substitute B for
A. On the first plate,

00:12:24.930 --> 00:12:29.220
spot compound A on the center
mark and one of the side marks,

00:12:29.220 --> 00:12:31.620
and allow both
spots to dry well.

00:12:40.050 --> 00:12:43.390
Drain the excess liquid from
the spotter onto a paper towel.

00:12:48.530 --> 00:12:51.723
And rinse your spotter in
clean solvent before switching

00:12:51.723 --> 00:12:52.640
to a different sample.

00:13:07.000 --> 00:13:10.240
Now, spot the unknown
mixture on the center mark

00:13:10.240 --> 00:13:12.550
and the other side mark
of the first plate.

00:13:16.260 --> 00:13:19.980
Repeat this procedure with
compound B on the second plate,

00:13:19.980 --> 00:13:23.870
and develop both plates.

00:13:23.870 --> 00:13:26.030
Now, compare the two plates.

00:13:26.030 --> 00:13:28.220
You can see that
the co-spot with A

00:13:28.220 --> 00:13:31.820
shows two distinct spots
while the co-spot with B

00:13:31.820 --> 00:13:33.470
shows only one.

00:13:33.470 --> 00:13:37.310
These results indicate that the
unknown sample contains only

00:13:37.310 --> 00:13:40.900
compound B.

00:13:40.900 --> 00:13:43.780
In this video, we have
surveyed the basic techniques

00:13:43.780 --> 00:13:45.820
that you need to know
to use thin layer

00:13:45.820 --> 00:13:47.410
chromatography in the lab.

00:13:50.530 --> 00:13:59.580
You have learned how to set
up a developing chamber, how

00:13:59.580 --> 00:14:08.480
to mark and apply your
sample to a TLC plate,

00:14:08.480 --> 00:14:16.470
how to develop the plate
in your developing chamber,

00:14:16.470 --> 00:14:19.530
how to visualize the spots
on your developed plate

00:14:19.530 --> 00:14:27.705
using a UV lamp, and how to
correctly calculate Rf values.

00:14:33.510 --> 00:14:35.070
You have also
learned how to choose

00:14:35.070 --> 00:14:40.600
an appropriate developing
solvent for your system

00:14:40.600 --> 00:14:43.810
and how to compare the
identity of two compounds.

00:14:46.780 --> 00:14:49.390
Remember, this video
is intended to help

00:14:49.390 --> 00:14:52.270
you prepare for lab by
providing a demonstration

00:14:52.270 --> 00:14:55.000
of the proper
experimental technique.

00:14:55.000 --> 00:14:56.950
It is not intended
as a replacement

00:14:56.950 --> 00:15:00.970
for reading your lab manual
or the supplementary material.

00:15:00.970 --> 00:15:03.370
In order to become a
great experimentalist,

00:15:03.370 --> 00:15:05.800
it is important that you
understand both theory

00:15:05.800 --> 00:15:07.240
and technique.

00:15:07.240 --> 00:15:08.500
Now it's your turn.

00:15:08.500 --> 00:15:11.470
Good luck.

00:15:11.470 --> 00:15:13.620
[MUSIC PLAYING]