WEBVTT

00:00:00.090 --> 00:00:02.490
The following content is
provided under a Creative

00:00:02.490 --> 00:00:04.059
Commons license.

00:00:04.059 --> 00:00:06.330
Your support will help
MIT OpenCourseWare

00:00:06.330 --> 00:00:10.690
continue to offer high quality
educational resources for free.

00:00:10.690 --> 00:00:13.320
To make a donation or
view additional materials

00:00:13.320 --> 00:00:17.270
from hundreds of MIT courses,
visit MIT OpenCourseWare

00:00:17.270 --> 00:00:20.805
at ocw@mit.edu.

00:00:20.805 --> 00:00:24.660
SHAOUL EZEKIEL: Now we're ready
to look at Fresnel diffraction.

00:00:24.660 --> 00:00:27.120
We're going to look at
Fresnel diffraction associated

00:00:27.120 --> 00:00:30.150
with a single slit.

00:00:30.150 --> 00:00:34.530
And then later, we'll look at
Fresnel diffraction associated

00:00:34.530 --> 00:00:37.030
with circular apertures.

00:00:37.030 --> 00:00:41.840
The setup for observing
Fresnel diffraction is here,

00:00:41.840 --> 00:00:46.200
is the laser, is the beam
from the laser again reflected

00:00:46.200 --> 00:00:48.870
by this mirror.

00:00:48.870 --> 00:00:52.590
And then we reflect the
beam again by this mirror

00:00:52.590 --> 00:00:55.140
into this lens.

00:00:55.140 --> 00:00:59.130
Now this is a short focal length
lens that focuses the light

00:00:59.130 --> 00:01:05.330
and passes it through a pinhole
over here, which we center it

00:01:05.330 --> 00:01:07.950
at the focus spot.

00:01:07.950 --> 00:01:10.540
The light coming
out from the pinhole

00:01:10.540 --> 00:01:14.100
then is shown on the
card here and then goes

00:01:14.100 --> 00:01:17.820
and falls onto the screen.

00:01:17.820 --> 00:01:19.900
So this is the setup.

00:01:19.900 --> 00:01:25.360
Now I'm going to
bring in the slit.

00:01:25.360 --> 00:01:31.590
So I'm going to put this slit
in front of the laser beam

00:01:31.590 --> 00:01:33.290
without disturbing
anything, I hope.

00:01:36.920 --> 00:01:41.380
So here is the single slit.

00:01:41.380 --> 00:01:43.770
Now I'm going to
adjust the spacing

00:01:43.770 --> 00:01:49.837
to be very small, so that we
start out with the Fraunhofer

00:01:49.837 --> 00:01:50.670
diffraction pattern.

00:01:50.670 --> 00:01:51.510
Now here it is.

00:01:51.510 --> 00:01:55.170
You can see on the screen, we
see the Fraunhofer diffraction

00:01:55.170 --> 00:02:00.140
pattern because the slit
width is small enough,

00:02:00.140 --> 00:02:01.980
so that we're in the
Fraunhofer region.

00:02:05.430 --> 00:02:09.830
Now what I'm going
to do is I'm going

00:02:09.830 --> 00:02:13.950
to start to widen the slit,
so to bring in the Fresnel

00:02:13.950 --> 00:02:14.950
diffraction pattern.

00:02:14.950 --> 00:02:16.890
So here I am.

00:02:16.890 --> 00:02:18.390
I start widening.

00:02:18.390 --> 00:02:20.550
And you can see now
you have to watch

00:02:20.550 --> 00:02:22.450
what happens to the fringes.

00:02:22.450 --> 00:02:24.420
Now things are going
to get pretty bright.

00:02:24.420 --> 00:02:28.230
And so what I'm going
to do, I'm going

00:02:28.230 --> 00:02:32.580
to introduce another screen
that is not so sensitive, so

00:02:32.580 --> 00:02:36.030
that we can observe the bright
Fresnel pattern on that one.

00:02:36.030 --> 00:02:37.780
Here we are.

00:02:37.780 --> 00:02:40.680
And you can see, I get a
dark line in the middle.

00:02:40.680 --> 00:02:43.820
Now we get two.

00:02:43.820 --> 00:02:55.250
And others, you can see how the
fringes behave in this case.

00:02:55.250 --> 00:02:57.720
I want to see what the
fringes near the edges

00:02:57.720 --> 00:03:00.930
look like and in the center.

00:03:07.050 --> 00:03:13.400
Now I know that the
effect is not observable

00:03:13.400 --> 00:03:15.870
very well under
these conditions.

00:03:15.870 --> 00:03:21.920
So what I'm going to do is
to turn down the room lights

00:03:21.920 --> 00:03:26.690
and see if we can improve
the visibility of the Fresnel

00:03:26.690 --> 00:03:29.900
diffraction pattern.

00:03:29.900 --> 00:03:32.990
Now with the room
lights dimmed, we're

00:03:32.990 --> 00:03:36.440
going to start again with the
Fraunhofer diffraction pattern

00:03:36.440 --> 00:03:38.010
on the sensitive screen.

00:03:38.010 --> 00:03:41.240
So again, you can see
that, at present, we

00:03:41.240 --> 00:03:45.080
have Fraunhofer diffraction.

00:03:45.080 --> 00:03:49.810
And I hope it's a little clearer
than with the room lights on.

00:03:49.810 --> 00:03:50.310
OK?

00:03:50.310 --> 00:03:51.950
So I'm going to start here.

00:03:51.950 --> 00:03:56.330
And then as I increase
the slit width,

00:03:56.330 --> 00:04:00.680
we're going to have a transition
to Fresnel diffraction.

00:04:00.680 --> 00:04:04.080
But as we know, the brightness
is going to get pretty large.

00:04:04.080 --> 00:04:09.830
So I will then bring in
the other screen here,

00:04:09.830 --> 00:04:12.650
so that we're not
going to saturate

00:04:12.650 --> 00:04:15.500
the camera too much when we
observe Fresnel diffraction.

00:04:15.500 --> 00:04:16.250
So here we go.

00:04:16.250 --> 00:04:17.690
This is Fraunhofer.

00:04:17.690 --> 00:04:22.860
Then I will now go make
the transition to Fresnel.

00:04:22.860 --> 00:04:27.200
And it's very, very
interesting how

00:04:27.200 --> 00:04:32.420
the light going through the
slit solves Maxwell's equations.

00:04:32.420 --> 00:04:35.270
And here we are.

00:04:35.270 --> 00:04:39.090
We got that dark
line in the middle.

00:04:39.090 --> 00:04:45.060
And then we have to
go back again and have

00:04:45.060 --> 00:04:51.920
the two lines, then the three.

00:04:51.920 --> 00:04:55.000
Now it's very
important to notice

00:04:55.000 --> 00:05:01.150
that the contrast is not 100%
like it is in the Fraunhofer

00:05:01.150 --> 00:05:02.830
diffraction.

00:05:02.830 --> 00:05:05.530
And those of you who
will do the calculation

00:05:05.530 --> 00:05:09.220
will, of course, understand
what I'm referring to.

00:05:09.220 --> 00:05:11.860
The spacing, you notice that
the spacing between the fringes

00:05:11.860 --> 00:05:14.410
gets tighter and
tighter as you approach

00:05:14.410 --> 00:05:20.050
the center or the center
between the two slits.

00:05:20.050 --> 00:05:24.850
In fact, the fringe spacing
gets so fine with large slit

00:05:24.850 --> 00:05:30.370
separation that you can't
even resolve them by eye.

00:05:30.370 --> 00:05:33.770
So there's lot of information
in that diffraction pattern.

00:05:33.770 --> 00:05:38.100
And I hope that you've
adjusted your monitors,

00:05:38.100 --> 00:05:42.490
so that you can
see these patterns.

00:05:42.490 --> 00:05:49.470
So here we are all
the way to Fraunhofer.

00:05:49.470 --> 00:05:52.110
And there's a little
transition, which

00:05:52.110 --> 00:06:00.630
is not that easy to calculate,
and then go into Fresnel.

00:06:04.291 --> 00:06:05.220
Here we are.

00:06:05.220 --> 00:06:08.700
Make it larger and larger.

00:06:08.700 --> 00:06:14.650
You can even see the
fringes in the center.

00:06:14.650 --> 00:06:17.280
Now that we've seen Fresnel
diffraction associated

00:06:17.280 --> 00:06:20.970
with a single slit,
now we're ready to look

00:06:20.970 --> 00:06:23.970
at Fresnel
diffraction associated

00:06:23.970 --> 00:06:26.500
with circular apertures.