WEBVTT

00:00:00.090 --> 00:00:02.490
The following content is
provided under a Creative

00:00:02.490 --> 00:00:04.059
Commons license.

00:00:04.059 --> 00:00:06.330
Your support will help
MIT mighty OpenCourseWare

00:00:06.330 --> 00:00:10.690
continue to offer high-quality
educational resources for free.

00:00:10.690 --> 00:00:13.320
To make a donation or
view additional materials

00:00:13.320 --> 00:00:17.290
from hundreds of MIT courses,
visit MIT OpenCourseWare

00:00:17.290 --> 00:00:20.611
at ocw.mit.edu.

00:00:20.611 --> 00:00:22.680
PROFESSOR: In a
previous demonstration

00:00:22.680 --> 00:00:26.580
on two-beam interference, we
saw that the fringe pattern

00:00:26.580 --> 00:00:29.250
was a series of vertical lines.

00:00:29.250 --> 00:00:33.990
The reason was that the
two beams were plane waves.

00:00:33.990 --> 00:00:37.800
And the lines were due to the
interference of two plane waves

00:00:37.800 --> 00:00:41.370
with a slight
angle between them.

00:00:41.370 --> 00:00:43.130
In this demonstration,
we're going

00:00:43.130 --> 00:00:46.230
to show that you can get all
kinds of shapes in the fringe

00:00:46.230 --> 00:00:50.070
pattern by simply placing
a lens in the setup.

00:00:50.070 --> 00:00:52.680
And here is the setup.

00:00:52.680 --> 00:00:55.650
As you may recall,
here's the laser.

00:00:55.650 --> 00:00:59.340
Here's the beam from the laser
being reflected by this mirror.

00:00:59.340 --> 00:01:03.060
And, here, we're
going to add a lens.

00:01:03.060 --> 00:01:06.480
The light coming out of the lens
and reflected by this mirror

00:01:06.480 --> 00:01:09.030
here will have
some curvature now.

00:01:09.030 --> 00:01:13.740
And when it enters the
Michelson interferometer here,

00:01:13.740 --> 00:01:18.120
the beam going to this
arm being the longer arm--

00:01:18.120 --> 00:01:19.900
slightly longer arm--

00:01:19.900 --> 00:01:22.400
will have slightly
different curvature

00:01:22.400 --> 00:01:25.410
when it interferes with the
beam coming from this arm,

00:01:25.410 --> 00:01:29.400
because the path length here
is shorter than this one.

00:01:29.400 --> 00:01:34.790
The two beams will interfere
and pass along this direction.

00:01:34.790 --> 00:01:38.010
Then they will get reflected
at this mirror through the lens

00:01:38.010 --> 00:01:40.600
and then onto the screen.

00:01:40.600 --> 00:01:45.150
So, now, if we take a close-up
at the fringe pattern,

00:01:45.150 --> 00:01:49.800
we will see that we
have circular fringes.

00:01:49.800 --> 00:01:53.760
And what's interesting
about the circular fringes

00:01:53.760 --> 00:01:57.750
is that the spacing
between the fringes

00:01:57.750 --> 00:02:01.710
can be changed by
disturbing the setup.

00:02:01.710 --> 00:02:09.630
For example, if I change
the length of this arm here,

00:02:09.630 --> 00:02:13.800
I can change the spacing
between the fringes,

00:02:13.800 --> 00:02:15.810
because I'm getting closer.

00:02:15.810 --> 00:02:21.480
I'm closer to the same
curvature as in the other arm.

00:02:21.480 --> 00:02:24.900
If I go further,
again, we can see

00:02:24.900 --> 00:02:27.450
that I can increase
the number of fringes,

00:02:27.450 --> 00:02:30.420
showing that, again,
the curvature has

00:02:30.420 --> 00:02:34.800
changed relative to this
fixed arm over here.

00:02:34.800 --> 00:02:39.150
Now, I'm going to show
the effect of misalignment

00:02:39.150 --> 00:02:42.870
on the circular fringes.

00:02:42.870 --> 00:02:46.520
If I adjust this mirror
to here, and then

00:02:46.520 --> 00:02:49.470
let's again look at the
fringes, and then you

00:02:49.470 --> 00:02:53.670
can see that by
misaligning this mirror,

00:02:53.670 --> 00:03:00.720
I can get arcs instead
of the bullseye.

00:03:00.720 --> 00:03:03.750
And, in fact, if I look
closely at the arcs,

00:03:03.750 --> 00:03:08.464
I can tell which way the
beams are misaligned.

00:03:15.250 --> 00:03:16.570
All right.

00:03:16.570 --> 00:03:24.460
Now, what I'll try and do is
to try and make the field go

00:03:24.460 --> 00:03:31.090
all dark or all bright
by making the two

00:03:31.090 --> 00:03:35.937
paths as identical as possible.

00:03:35.937 --> 00:03:37.770
Now, you can see, I
only have about a couple

00:03:37.770 --> 00:03:41.010
of fringes in the
interference pattern.

00:03:41.010 --> 00:03:44.870
They're slightly misaligned.

00:03:44.870 --> 00:03:49.470
So I have them a
little better centered.

00:03:49.470 --> 00:03:54.660
So let me close in
one path, and then

00:03:54.660 --> 00:03:58.740
see if I can get
complete darkness

00:03:58.740 --> 00:04:01.910
or complete brightness.

00:04:01.910 --> 00:04:06.540
Let me adjust the
alignment as I move in.

00:04:12.620 --> 00:04:19.720
Here, you can see I'm
getting close to equal path.

00:04:19.720 --> 00:04:21.980
And then a little bit more.

00:04:26.960 --> 00:04:27.475
Not quite.

00:04:38.560 --> 00:04:41.720
That's almost--
we're almost there.

00:04:41.720 --> 00:04:43.450
You can see, if I
press on the table,

00:04:43.450 --> 00:04:47.870
you can see the screen
going bright and dark.

00:04:47.870 --> 00:04:51.850
I think I have a
little bit to go.

00:04:51.850 --> 00:05:02.890
And maybe we can get
complete extinction.

00:05:02.890 --> 00:05:03.390
Let's see.

00:05:03.390 --> 00:05:15.851
This is pretty close to
a complete extinction.

00:05:18.940 --> 00:05:22.050
So in this brief
demonstration then,

00:05:22.050 --> 00:05:27.480
we've shown that you can get
circular fringes, bullseye,

00:05:27.480 --> 00:05:30.480
arcs, and what
have you, by simply

00:05:30.480 --> 00:05:34.170
making the input beam
to the interferometer

00:05:34.170 --> 00:05:36.060
have some curvature.

00:05:36.060 --> 00:05:40.830
And by adjusting the path length
difference between the two

00:05:40.830 --> 00:05:45.010
arms, you can get a
variety of fringe systems.