WEBVTT

00:00:00.120 --> 00:00:02.490
MAN: The following content
is provided under a Creative

00:00:02.490 --> 00:00:04.059
Commons license.

00:00:04.059 --> 00:00:06.350
Your support will help
MIT OpenCourseWare

00:00:06.350 --> 00:00:10.720
continue to offer high quality
educational resources for free.

00:00:10.720 --> 00:00:13.350
To make a donation or
view additional materials

00:00:13.350 --> 00:00:17.300
from hundreds of MIT courses,
visit MIT OpenCourseWare

00:00:17.300 --> 00:00:18.480
at OCW.mit.edu.

00:00:20.792 --> 00:00:22.500
SHAOUL EZEKIEL: This
demonstration, we're

00:00:22.500 --> 00:00:27.570
going to show the influence
of an optical fiber

00:00:27.570 --> 00:00:31.616
on the polarization
properties of light.

00:00:31.616 --> 00:00:37.080
In this case, we're going to
use a normal single mode fiber.

00:00:37.080 --> 00:00:40.540
The setup is as shown here.

00:00:40.540 --> 00:00:42.090
We have a helium neon laser.

00:00:42.090 --> 00:00:45.090
Here's the beam from the
laser reflected by this mirror

00:00:45.090 --> 00:00:48.960
here, then by
another mirror here,

00:00:48.960 --> 00:00:53.690
into a quarter-wave
plate and a polarizer.

00:00:53.690 --> 00:00:58.380
And, in this way, by
rotating the polarizer here,

00:00:58.380 --> 00:01:01.110
I can select any
linear polarization

00:01:01.110 --> 00:01:03.780
I want in this region.

00:01:03.780 --> 00:01:07.795
Then what we do is we
take the light from here,

00:01:07.795 --> 00:01:09.990
we pass it through a
short focal length lens,

00:01:09.990 --> 00:01:14.250
focus it into the fiber to the
single mode fiber over here,

00:01:14.250 --> 00:01:17.070
and then the output of
the fiber is, again,

00:01:17.070 --> 00:01:20.310
[INAUDIBLE] by another
short focal length lens,

00:01:20.310 --> 00:01:22.830
and then the output
of this lens,

00:01:22.830 --> 00:01:27.490
and we let go onto the screen.

00:01:27.490 --> 00:01:29.640
So this is the basic
setup, now we're

00:01:29.640 --> 00:01:34.170
ready to look at polarization
effects in fibers.

00:01:34.170 --> 00:01:39.840
Now, first, we have to establish
the state of polarization

00:01:39.840 --> 00:01:42.360
of the light going
into the fiber.

00:01:42.360 --> 00:01:44.880
What I'm going to do,
take this polarizer

00:01:44.880 --> 00:01:47.630
and place it over here.

00:01:47.630 --> 00:01:53.100
And then I'll take a
card, place it here.

00:01:53.100 --> 00:01:58.990
And now I want to rotate
the polarizer and the axis.

00:01:58.990 --> 00:02:01.682
The little white arrow here
indicates the transmission axis

00:02:01.682 --> 00:02:02.390
of the polarizer.

00:02:02.390 --> 00:02:07.980
So I can rotate
polarizer now, and then

00:02:07.980 --> 00:02:13.390
in this region over
here I have now,

00:02:13.390 --> 00:02:17.100
which means that the state
of polarization of light

00:02:17.100 --> 00:02:21.180
is orthogonal to the
direction of this arrow.

00:02:21.180 --> 00:02:24.420
So indeed we have
plane-polarized light as

00:02:24.420 --> 00:02:27.750
indicated by the
arrow over here, which

00:02:27.750 --> 00:02:30.170
is orthogonal to the one here.

00:02:30.170 --> 00:02:32.276
All right, so now
we've established the--

00:02:32.276 --> 00:02:38.470
that the state of polarization
is linear going into the fiber.

00:02:38.470 --> 00:02:40.500
Now, let's look at the
polarization of the light

00:02:40.500 --> 00:02:42.200
coming out of the fiber.

00:02:42.200 --> 00:02:45.690
Again, I'm going to
take the polarizer

00:02:45.690 --> 00:02:48.930
and place it over
here, the output.

00:02:52.460 --> 00:02:57.110
And now let's look at
the spot in the inset.

00:02:57.110 --> 00:02:58.730
Here we have the
spot in the inset.

00:02:58.730 --> 00:03:01.580
Now, I'm going to
rotate the transmission

00:03:01.580 --> 00:03:05.852
axis of the polarizer
to see what we have.

00:03:05.852 --> 00:03:09.042
Gee, we have indeed
plane-polarized light

00:03:09.042 --> 00:03:10.250
also coming out of the fiber.

00:03:10.250 --> 00:03:12.470
So we have plane-polarized
light going in

00:03:12.470 --> 00:03:17.350
and plane-polarized
light coming out.

00:03:17.350 --> 00:03:22.310
Now, to demonstrate
what the fiber does

00:03:22.310 --> 00:03:27.290
to the polarization in a very
dramatic way, all I have to do

00:03:27.290 --> 00:03:35.150
is twist the fiber by
just pushing on it.

00:03:35.150 --> 00:03:39.830
And you can see that now, just
by applying a little stress

00:03:39.830 --> 00:03:40.950
to the fiber--

00:03:40.950 --> 00:03:43.070
now I have changed
the polarization

00:03:43.070 --> 00:03:47.960
because now I have light
coming out of the polarizer

00:03:47.960 --> 00:03:52.120
while before it was not.

00:03:52.120 --> 00:03:55.650
Now, again, I can push the
fiber around some more.

00:03:55.650 --> 00:03:58.787
As you can see, I
can change the amount

00:03:58.787 --> 00:04:00.620
of light coming through
the polarizer, which

00:04:00.620 --> 00:04:02.690
means that this
state of polarization

00:04:02.690 --> 00:04:07.610
is changing just by simply
applying simple stress.

00:04:07.610 --> 00:04:11.120
I can apply mechanical
stress like I'm doing now.

00:04:11.120 --> 00:04:20.029
I can get the similar effect
by heating the fiber and so on

00:04:20.029 --> 00:04:25.130
so that the state
of polarization

00:04:25.130 --> 00:04:32.810
then can be influenced quite
a bit by the environment--

00:04:32.810 --> 00:04:35.180
the effect of the
environment on the fiber.

00:04:35.180 --> 00:04:38.660
You can see here I
can make it come out

00:04:38.660 --> 00:04:41.340
very bright through the
polarizer when originally it

00:04:41.340 --> 00:04:41.840
was not.

00:04:41.840 --> 00:04:45.140
Here we are
[INAUDIBLE] now zero,

00:04:45.140 --> 00:04:46.970
which it means plane polarized.

00:04:46.970 --> 00:04:50.150
Now, it's some state
of polarization.

00:04:50.150 --> 00:04:51.680
In fact, I'm going to hold it--

00:04:51.680 --> 00:04:54.620
hold the fiber in this position,
and then now I'm going to go

00:04:54.620 --> 00:04:57.200
and I'm going to turn the
polarizer to see indeed

00:04:57.200 --> 00:05:00.950
do I have plane-polarized
light or elliptically

00:05:00.950 --> 00:05:01.760
polarized light.

00:05:04.900 --> 00:05:07.000
Well, it's elliptically
polarized light

00:05:07.000 --> 00:05:09.870
because I can't [INAUDIBLE].

00:05:09.870 --> 00:05:12.170
So now I have changed
this state of polarization

00:05:12.170 --> 00:05:16.570
then from linear to elliptical.

00:05:16.570 --> 00:05:23.680
And, again, if I put
more stress on the fiber,

00:05:23.680 --> 00:05:26.350
let's see now what state
polarization I get now?

00:05:26.350 --> 00:05:28.300
Again, you can see it
is elliptical because I

00:05:28.300 --> 00:05:32.620
can't [INAUDIBLE].

00:05:32.620 --> 00:05:37.300
So in conclusion then,
the-- a single mode--

00:05:37.300 --> 00:05:41.290
irregular single mode
fiber can change the state

00:05:41.290 --> 00:05:45.690
the polarization of light going
into it into almost anything,

00:05:45.690 --> 00:05:47.550
to plane polarized,
circular polarized,

00:05:47.550 --> 00:05:48.880
elliptically polarized.

00:05:48.880 --> 00:05:54.370
And this is influenced
greatly by the environment

00:05:54.370 --> 00:05:56.950
that the fiber is in.

00:05:56.950 --> 00:06:00.130
So it's very difficult
to maintain then

00:06:00.130 --> 00:06:05.050
a good state of polarization or
a known state of polarization

00:06:05.050 --> 00:06:08.260
in a single mode fiber
because of these environmental

00:06:08.260 --> 00:06:10.520
disturbances.

00:06:10.520 --> 00:06:14.800
If one wants to maintain,
let's say, linear polarization,

00:06:14.800 --> 00:06:18.960
one would have to use a
polarization maintaining fiber.