Basictechniques2
A thin taper has the last half-inch bent over the edge
Description:
After drawing a taper, bending it into a corner or scroll is a common next step. Here, the edge of the anvil is used to put a start the bend.
file
61 kB
A thin taper has the last half-inch bent over the edge
Alt text:
A thin taper has the last half-inch bent over the edge.
Caption:
After drawing a taper, bending it into a corner or scroll is a common next step. Here, the edge of the anvil is used to put a start the bend.
Credit:
Credit: Image courtesy of MIT OpenCourseWare.
Course Info
Instructor
Departments
As Taught In
Fall
2008
Level
Learning Resource Types
collections
Image Gallery
