|Help support MIT OpenCourseWare by shopping at Amazon.com! MIT OpenCourseWare offers direct links to Amazon.com to purchase the books cited in this course. Click on the Amazon logo to the left of any citation and purchase the book from Amazon.com, and MIT OpenCourseWare will receive up to 10% of all purchases you make. Your support will enable MIT to continue offering open access to MIT courses.|
|1||Introduction to MuSS and SPM Case Study |
Course Goals, Logistics and Expectations
Comparison of MuSS and MoSS Fundamentals
MuSS Example: Overview of SPM Technology
|Suh, Nam P. "Complexity Theory Based on Axiomatic Design." Chapter 3 in Complexity: Theory and Applications. New York: Oxford University Press, 2005. ISBN: 9780195178760.|
|3||Macro/Meso-scales Components and Characteristics |
Principles, Metrics and Types of Cross-scale Incompatibilities
Incompatibilities of Macro/Meso Parts with Micro/Nano Parts
Integrating Constraints on Macro/Meso-scale Parts
|Hale, Layton C. "Principles and Techniques for Desiging Precision Machines." MIT PhD Thesis. 1999, pp. 67-82, and 174-204. (PDF - 1.4 MB)|
|6||Scanning Probe Microscopy Project Introduction |
Project Goals and Expectations
Demonstration of 2.76 SPM
Questions, Team Selection and Planning
|Pohl, Dieter W. "Some Design Criteria in Scanning Tunneling Microscopy." IBM Journal of Research and Development 30, no. 4 (July 1986): 417. |
Lewis, R. A., et al. "Student Scanning Tunneling Microscope." Am. J. Phys. 59, no. 1 (January 1991): 38.
Binning, G., et al. "Surface Studies by Scanning Tunneling Microscopy." Physical Review Letters 49, no. 1 (5 July 1982): 57.
Golovchenko, J. A. "The Tunneling Microscope: A New Look at the Atomic World." Science (New Series) 232, no. 48-53 (4 April 1986): 4746.
|10||Nominal and Statistical Error Budgets |
Principles of Determinism, Accuracy, Repeatability
Kinematic Error Modeling of Rigid-flexible Systems
Nominal and Probabilitic System Error Modeling
|Prepost, R. "Scanning Tunneling Microscope." Notes for Physics 407 Advanced Laboratory, University of Wisconsin, April 26 2000, pp. 1-14 (PDF)|
|12||Mechanical Interfaces for Cross-scale Alignment |
Principles of Mechanical Constraint
Design of Rigid, Flexible and Rigid-flexible Constraint
Manufacturing and Assembly of Cross-scale Interfaces
|Hale, Layton C. Appendix C: Contact Mechanics, in "Principles and Techniques for Desiging Precision Machines." MIT PhD Thesis. 1999, pp. 417-426. (PDF) |
Slocum, A. "Kinematic Couplings for Precision Fixturing - Part 1: Formulation of Design Parameters." Precision Engineering 10, no. 2 (April 1988): 86.
Slocum, A. "Kinematic Couplings for Precision Fixturing - Part 2: Experimental Determination of Repeatability and Stiffness." Precision Engineering 10, no. 3 (July 1988): 115.
Slocum, A. "Design of Three-groove Kinematic Couplings." Precision Engineering 14, no. 2 (April 1992): 67.
Culpepper, M. L., et al. "Design of Integrated Eccentric Mechanisms and Exact Constraint Fixtures for Micron-level Repeatability and Accuracy." Paper accepted for publication in Precision Engineering.
Mangudi, K., and M. L. Culpepper. "Active, Compliant Fixtures for Nanomanufacturing." 2004 Annual Meeting of the American Society for Precision Engineering, Orlando, FL., October 2004, pp. 113 -116.
Slocum, et al. "Flexural Mount Kinematic Couplings and Method." U. S. Patent 5, 678, 944. Granted October 21, 1997.
Culpepper, M. L., et al. "Quasi-kinematic Couplings for Low-cost Precision Alignment of High-volume Assemblies." Transactions of the ASME 126 (May 2004): 456-463.
Culpepper, M. L. "Design of Quasi-kinematic Couplings." Precision Engineering 28 (2004): 338–357.